Initial Setting; Switching To The Initial Setting Mode; Changing The Temperature Unit; Changing The Time Display - Mitsubishi Electric PAR-SL101A-E Serie Manual De Instrucciones / Manual De Instalación

5. Initial setting

G
8
2
Fig. 5-1
A
Fig. 5-2
D
C
Fig. 5-3
The following settings can be made in the initial setting
mode.
Item
Temperature unit
Time display
AUTO mode
Pair No.
Backlight

5.1. Switching to the initial setting mode

(Fig. 5-1, Fig. 5-2)
1. Press the
1
• If the weekly timer is enabled, press the
2. Press the
• The Function setting screen will be displayed
4
3
• Press the
3. Check that function No. "1" is displayed, and then
5
press the
• The Screen display setting screen will be
6

5.2. Changing the temperature unit

7
(Fig. 5-1, Fig. 5-3 B)
9
Press the
• Pressing the
ature unit ( °C / °F ). (The factory setting is "°C".)
: The temperature is displayed in degrees Celsius.
: The temperature is displayed in degrees Fahrenheit.

5.3. Changing the time display

(Fig. 5-1, Fig.5-3 c)
Press the
• Pressing the
display (
hour format".)

5.4. Changing the AUTO mode

(Fig. 5-1, Fig.5-3 D)
Press the
• Pressing the
mode (
point".)
B
E
F
Setting
ºC/ºF
12-hour format/24-hour format
Single set point/Dual set point
0–3
On/Off
button 1 to stop the air conditioner.
button 2 to disable the timer. (
button 3.
and the function No. A will blink.
button 4 to change the function No.
button 5.
displayed.
button 6.
button 6 changes the temper-
button 7.
button 7 changes the time
/ ). (The factory setting is "12-
: The time is displayed in the 12-hour format.
: The time is displayed in the 24-hour format.
button 8.
button 8 changes the Auto
/ ). (The factory setting is "Single set
: The AUTO mode operates as the usual auto-
matic mode (Single set point).
: The AUTO mode operates using dual set
points.
Fig. 5-3
B
C
D
E
F
en
G disappears.)
5