Engine.coolant.level.check - VM Motori MR 700 Serie Manual De Instrucciones

ENGINE OIL LEVEL CONTROL
Follow the procedure below.
1 -Start the engine and bring it to the
operating temperature (70÷80 °C).
2 -Turn off the engine and remove the
ignition key.
3 -Place the engine on a perfectly level
surface.
Important
The oil level should be inclu-
ded between the minimum and
maximum marks. Do not mix
oils of different brands or with
different features (see "Re-
commended lubricants")..
ENGINE COOLANT LEVEL CHECK
Follow the procedure below.
1 -Start the engine and bring it to the
operating temperature (70÷80 °C).
2 -Turn off the engine and remove the
ignition key.
3 -Let the engine cool down properly.
4 -Unscrew the load plug (P).
Warning - Caution
Open the plug gently to drain the
pressure.
5 -Top up, if necessary, from plug (P).
As for the liquid quantity and type, see
"Specifications".
Ed. 3 - 2012_11
4 -Wait a few minutes so that all the oil
will flow into the sump.
5 -Remove the dipstick (L) and check the
oil level.
6 -Top up, if necessary, from plug (M). As
for the oil quantity, see "Specifications".
dipstick (L)
Important
The liquid level should be included
between the minimum and maximum
notches printed on the expansion
chamber.
40
MR 700
load plug (M)
load plug (P)
English