Renfert SILENT powerCAM EC Traducción Del Manual De Instrucciones Original página 37

5.5.1 Audible Signal (Buzzer)
When the unit is switched on, various inputs are confirmed with an audible signal.
To change this:
⇒ Press operating mode key (21) for 3 sec�
LED1
♦ Start the programming mode�
⇒ Press operating mode key (21) again 1 x�
♦
LED1
LED2
⇒ Press enter key (25)�
♦ Audible signal selected�
LED1 LED2
flashes: audible signal is switched on
♦
♦ off: audible signal is switched off
T2
⇒ Switch the acoustic signal on or off with the suction performance key (23)�
⇒ Press enter key (25)�
T2
♦ Save entry, exit programming mode�
5.5.2 Time interval for "full" indication for the dust drawer
After reaching a specifically set time interval, a message indicates the dust drawer should be emptied.
It is possible to select between 5 different times (factory setting is 50 hrs�)�
Time interval / hrs
In the case of heavy dust generating devices (e.g. sandblasting units), the time interval for the
"empty dust drawer" indication should set to 5 hrs or if required 10 hrs.
To change:
Press operating mode key (21) for 3 sec�
LED1
LED2 LED3
♦ Start the programming mode�
⇒ Press operating mode key (21) again 2 x�
♦ flashes.
LED1
LED2 LED3
⇒ Press enter key (25)�
♦ Select the time interval for "full" indication of dust drawer�
T2
T3
♦
⇒ Change the time period with the extraction force -key (23)�
Each key press selects the next time interval� After 100 hrs it is possible to select 2 hrs again�
T2
T3
⇒ Press enter key (25)
♦ Save input, exit the programming mode�
LED2 LED3
flashes
LED3 LED4
T2 T3 T4
LED3 LED4
T1a/T1b
T3 T4
T1a/T1b
T3 T4
Blink signal in the display
2
5
10
50
100
LED4
LED4
T1a/T1b
T4
A blink signal is emitted according to the set time interval�
T1a/T1b
T4
LED4
T1a/T1b
LED1
LED2 LED3
1x
T2 2x
T3
3x
4x
5x
- 11 -
21
LED4
T1a/T1b
T4
21
EN
23 25
Fig. 9
23 25
Fig. 10