Introduction - Mettler Toledo M100 Guía De Configuración Rápida

1

Introduction

h
4
Note: The Quick Setup Guide is a brief operating instruction.
The M100 transmitter must only be installed, connected, commissioned, and main-
tained by qualified specialists e.g. electrical technicians in full compliance with the
instructions in this Quick Setup Guide, the applicable norms and legal regulations.
The specialist must have read and understood this Quick Setup Guide and must
follow the instructions it contains. If you are unclear on anything in this Quick Setup
Guide, you must read the Operation Manual (supplied on CD-ROM).
The Operation Manual provides detailed information on the device.
The M100 transmitter should be operated only by personnel familiar with the trans-
mitter and who are qualified for such work.
Intended Use
The M100 is a 2-wire head mount transmitter for analytical measurements with HART
communication capabilities. The M100 is a single-channel, multi-parameter unit for
pH/ORP, conductivity and dissolved oxygen measurement. It is only compatible with
ISM sensors.
The M100 transmitter is designed for use in the process industries and is certified
intrinsically safe for installations in hazardous areas.
M100 parameter fit guide
Parameter
pH/ORP
pH/pNa
Conductivity 4-e
Amp. DO ppm/ppb/trace
M100 2XH
ISM
•
•
•
•