Haier HMV1640 Instrucciones De Instalación página 27

CHECK THE BLOWER PLATE
1. Place the microwave in its upright position, with the top of the unit facing up.
2. Check to see that the blower plate is correctly installed on the microwave oven.
MOUNT THE MICROWAVE OVEN
Use two or more people to move and install microwave oven.
Failure to do so can result in back or other injury.
IMPORTANT:
•
Do not grip or use door handle during installation.
•
If the cabinet front hangs below the cabinet bottom shelf, it is recommended
that you use filler blocks to avoid damaging the case by over tightening the
screws.
1. Thread the power cord through the hole in the bottom of the overhead cabinet.
Keep the power cord tight while mounting the oven. Do not pinch cord or lift
oven by pulling cord.
NOTE: If the overhead cabinet is metal, use the nylon grommet around the
power cord hole to avoid cutting the power cord.
2. Using two or more people, lift the microwave, tilt it forward, and hook slots at
back bottom edge onto four lower tabs of mounting plate.
3. Rotate front of oven up against cabinet bottom.
a
WARNING
Excessive Weight Hazard
a
Blower Plate
25