Haier HMV1640 Instrucciones De Instalación página 18

4. Insert a self-aligning screw through top center cabinet hole. Temporarily secure
the oven by turning the screw at least two full turns after the threads have
engaged. (It will be completely tightened later.) Be sure to keep power cord tight.
Be careful not to pinch the cord, especially when mounting flush to bottom of
cabinet.
a
b
f
5. Attach the microwave oven to the overhead cabinet.
6. Insert two self-aligning screws through the outer top cabinet holes. Turn two full
turns on each screw.
7. Tighten center screw completely.
8. Tighten the outer two screws to the top of the microwave oven. (While
tightening screws, hold the microwave oven in place against the wall and the top
cabinet).
ADJUST THE EXHAUST ADAPTER
1. Open the overhead cabinet, and then adjust the exhaust adapter to connect to
the house duct.
b
a
16
c
d
e
c
d
a
Cabinet Front
b
Cabinet Bottom Shelf
c
Filler Block
d
Equivalent to Depth of
Cabinet Recess
e
Self-Aligning Screw
f
Microwave Oven Top
a
Blower Plate
b
Damper
c
Back of Microwave
d
For Front-to-Back or Side-to-Side
Adjustment, Slide the Exhaust
Adapter as Needed