Assembly And Connection - Airzone ACUAZONE IBPRO32 Guía De Instalación Rápida

Access all our technical documents and the self-diagnosis section, check the most FAQs,
ES

ASSEMBLY AND CONNECTION

EN
Important: Respect the color code for all the system elements.
FR
IT
PT
DE
1.- Connecting the zone and control modules of the system to the Airzone control board
Connect the modules of the system in any of the three Airzone connection bus terminals
Use (2x0.5+2x0.22 mm
secure the wires using the turrets.
Note: For elements externally powered at 110 /230 Vac, for the communications, it is only necessary to connect the poles "A", "B" and
the shield of the bus.
28
certificates, watch our videos and read our declaration of conformity at:
myzone.airzone.es/airzone-products/
2 ) Airzone wire. They must be connected by busFor added security,
No. Description
Airzone connection bus
SW1
SW2
Automation bus
AC unit bus
Alarm input (normally closed)
Protection temperature probe
CMV/Boiler
AC Start-stop relay
Power supply
.