Bosch PPS 7S Manual Original página 31

OBJ_BUCH-1259-004.book Page 31 Thursday, November 6, 2014 10:45 AM
 Do not make any modifications to the laser equipment.
The setting options described in these operating instruc-
tions can be used safely.
 Do not replace the installed laser with another laser
type. A laser that is not suitable for this power tool could
pose dangers for other persons.
 Never leave the machine before it has come to a com-
plete stop. Cutting tools that are still running can cause in-
juries.
 Never use the machine with a damaged cable. Do not
touch the damaged cable and pull the mains plug when
the cable is damaged while working. Damaged cables in-
crease the risk of an electric shock.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Products sold in AUS and NZ only: Use a residual current de-
vice (RCD) with a rated residual current of 30 mA or less.
Symbols
The following symbols can be important for the operation of
your power tool. Please memorise the symbols and their
meanings. The correct interpretation of the symbols helps
you operate the power tool better and more secure.
Symbol Meaning
 Laser radiation
Do not view directly with optical
instruments
Class 1M laser product
 Keep hands away from the cutting
area while the machine is running.
Danger of injury when coming in
contact with the saw blade.
 Never stand on the power tool. Seri-
ous injuries can occur when the power
tool tips over or when inadvertently
coming into contact with the saw
blade.
 Wear a dust respirator.
Bosch Power Tools
Symbol Meaning
 Wear ear protectors. Exposure to
noise can cause hearing loss.
 Wear safety goggles.
Do not dispose of power tools into
household waste!
Only for EC countries:
According to the European Guideline
2012/19/EU for Waste Electrical and
Electronic Equipment and its implemen-
tation into national right, power tools that
are no longer usable must be collected
separately and disposed of in an environ-
mentally correct manner.
Indicates the maximum permissi-
ble workpiece height for the
standard bevel angles 0° and 45°.
Observe the dimensions of the
saw blade. The hole diameter
must match the tool spindle with-
out play. Do not use reducers or
adapters.
When changing the saw blade, pay
attention that the kerf width is not
less than 2,2 mm and the blade
body thickness not greater than
2,2 mm. Otherwise, there is dan-
ger that the riving knife (2,2 mm)
becomes wedged in the work-
piece.
English | 31
1 609 92A 0VR | (6.11.14)