Lavorwash INDEPENDENT 1900 Manual De Instrucciones página 15

4-Water inlet + filter
5-Lance
6-High pressure hose
7-Gun
8-Nozzle cleaning pin
9-Accessory holder
10-Cable holder
11- Engine oil alarm
fig. 1
Whenever you need to
stop the machine, it is
necessary to use the safety
lock
gun, in order to avoid
fortuitous openings (fig.
1).
fig. 2
Fill detergent tank. Connect foam unit to the
gun ensuring connection is correctly secured
(fig. 2).
fig. 3A
fig. 4
The high pressure washer can be equipped
with one or more types of spraying lances:
Spraying angle can be adjusted. Straight or fan
water jet can be obtained by rotating the knob
clockwise or anticlockwise (fig. "3A"-"3B").
Nozzle and rotating jet to increase the
washing effect (fig. 4)(the turbo lance is not
adjustable).
CAUTION: do not rotate the knob.
VALVE
This device enables the machine's by-pass
, placed on the
operation through automatic water discharge
whenever it reaches a temperature of nearly
60°C and cooling working components.
CAUTION:
with this disposal must not operate for more
than 2 minutes with released gun. Recycled
water raises its temperature remarkably
causing great damages to the pump.
OPERATING INSTRUCTIONS
CAUTION: Do not run the engine with a
high or low oil level as this can cause engine
damage. If you have further questions
regarding the engine, please refer to the
engine's operating manual included with
the unit.
CAUTION: The engine is not provide with
oil. It is necessary to fil the carter before
starting the engine.
CAUTION: Before starting the pump, check
the oil level in the pump.
fig. 3B
CAUTION: If it is the first time that you use
the machine or if you do not operate the
machine for a long period, it is necessary
to connect, for some minutes, the suction
hose, in order to let possible impurities go
out, so that the nozzle gun will not become
clogged.
CAUTION: Fill gas tank with unleaded
gasoline. Do not use leaded gasoline.
appliances that are not provided
EN
15