Tabla de contenido
English
The "Setup" entry displays the setup settings introduced during the
Data Standard insertion phase:
STANDARD DATA
– –
! ! ! ! !
Before performing this operation, switch off the machine and position
dipswitch 1 on display screen = ON, then switch on the machine.
If the procedure described above is not performed (dip1=ON), this
message will appear on the display:
NEW SOFTWARE VERSION
When inputting the Standard Data, you are prompted to input data
regarding model and type of machine:
- MODEL: 2, 3, 4 groups;
- TYPE: coffee, cappuccino 1, cappuccino 2;
- STEAM: YES / NO (steam button);
- TURBOSTEAM: YES / NO;
- FEEDING: electric, electric + gas, gas;
- MENU: different types of drinks
The "dip setting" entry displays the dipswitch settings.
# DIP SETTINGS
1 2 3 4 5 6 7 8
+
u
2 GR
******************
LOAD
STANDARD DATA
******************
+
u
Setup
Entering Standard Data
Using the "+" key (30) and the "-" key (31), select the parameters,
then press the "PRG" key (29) to confirm the details.
After this operation, switch off the machine and reset the dipswitch
1 display screen to OFF.
Then:
- Switch on the machine again
- Reset date and time, and reset the desired language, if needed.
- if wished, reset maintenance parameters (see "Configuration menu
- Maintenance")
- Zero the error log.
Dip settings
Under standard conditions, the dip-switches are positioned on OFF.
- DIP 1 = OFF - ON Input of standard data
- DIP 2 = OFF
- DIP 3 = OFF - ON Simulation of engineer's key
- DIP 4 = OFF - ON Bookkeeping
- DIP 5 = OFF - ON allows keys sequence to enter programming
- DIP 6 = OFF
- DIP 7 = OFF
- DIP 8 = OFF
For more details, please consult the technical manual at the "Setting
- CPU Dip-Switch" paragraph.
171
English
Tabla de contenido
