English
6.
DATA menu: COUNTERS
Once you have entered the programming menu, access the DATA
MENU, pressing the "i" (27) key. The following will be displayed:
# DATA MENU
COUNTERS
Use the "+" (30) and "-" (31) keys to position the cursor on the
COUNTER line, then press the PRG (29) key. The following will appear
on the display:
# COUNTERS
N° coffee gr. 1
Parameters calculated are:
- N. coffee (number of coffee beverages)
- N. milk (number of milk beverages)
- N. water (number of times water is dispensed)
- N. steam (number of times steam is dispensed using the steam
button)
- N. steam TS (number of times steam is dispensed using the
Autosteam function)
- N. steam + air TS (number of times steam and air are dispensed
using the Autosteam function)
6.1
DATA menu: Wash 1 Archive
# DATA MENU
WASH 1 ARCHIVE
Press the "PRG" key (29) key, the following message appears on the
display:
#WASH 1 ARCHIVE
Required
+
u
+
u
01234
+
u
+
u
00005
169
- N. tot coffee (total number of coffee beverages).
The "Nr. Coffee" line appears as many times as the number of groups
on the machine.
Counters can be zeroed by aligning the cursor on the selected entry,
pressing the PRG (29) key, and then pressing the '+" (30) or "-" (31)
key.
Note: Parameters that cannot be zeroed are:
- N. tot coffee
The parameters for the WASH 1 log that can appear on the display
are:
- Requests: number of wash cycles that have been requested
by the machine.
- Executed: number of wash cycles that were performed within
the timeout time of 60'.
#WASH 1 ARCHIVE
Required
NOTE: If the wash cycles requested occur during the timeout, under
the entry "Executed" you will also see a list of the last 10 "failed"
wash cycles, with progressive number and date.
The first line refers to the most recent date.
Use the "+" (30) and "-" (31) keys to scroll through the failed wash
cycles, then press the RES (24) key to pass to another menu.
English
+
u
00005