Tabla de contenido
English
1.
Day-to-day operation
WITH THE TIMER FUNCTION ON
With machines using just electrical heating
Turning the machine ON and OFF takes place automatically
as programed.
With machines using mixed gas/electric heating:
The electrical ON/OFF function does not control gas heating.
Therefore, at the end of each day's operating period, you
must TURN OFF the gas by turning the gas-tap knob back to
the (0) position. The following working day, turn the gas system
back ON as described in the "Gas Light-Up"paragraph.
Note: when the machine is working in the automatic on/off
function do not use the general switch (1) to switch off the
machine. If this happens, the machine will not be able to
switch on again automatically.
WITH THE TIMER FUNCTION OFF
Note: open the lower part of the machine, as shown in figure,
to access to the main switch (1):
1
After switching on the machine using the on/off switch (1),
the message "PLEASE WAIT" appears on the display.
Afterwards, the menu below appears:
11 February 2008
Description display symbols
This symbol indicates the boiler water level.
During the loading phase, the dark bottom part of the icon
blinks. At the same time the "level Indicator" (3) lights up; (the
"optimum level Indicator" (2) switches off).
When the optimum level is reached, the symbol looks like
this:
the "optimum level Indicator" (2) lights up; ("level Indicator"
(3) switches off)
2
3
15:40:51
This symbol indicates that the electric heating in
the machine is not functioning.
During the standby phase, the symbol alternates with the
icons
to indicate that the (OK) key must be pressed for a few
seconds to activate the boiler resistance.
When the resistance is activated and functioning, the icon
looks like this
When the boiler pressure reaches the set value, the icon
looks like this
When the machine is in operation, the two icons
alternate on the display, indicating the presence of the electric
heating.
Note: When the on/off function is programmed, the electric
heating takes place automatically without having to
press the key (OK).
37
This symbol indicates the boiler pressure value.
50
English
(dark inside).
(light inside).
OK
Tabla de contenido
