Tabla de contenido
English
2.
Cup-Warmer
! ! ! ! !
CAUTION: do not put any cloth on the cup-warmer.
The machines have a cup warmer tray (23) for stocking and
pre-heating the cups.
3.
Gas installation switch-on (for + GAS machines only)
! ! ! ! !
" Don't switch on the gas installation when the
boiler is under pressure ".
Before using the machine check that:
- the main electricity supply ON/OFF switch is ON;
- the main water supply tap is open .
- the gas supply tap is open.
Turn the main switch ON/OFF (1) to position 1.
The machine completes the operations described under "
Daily Switch-On ".
Press and turn the gas tap knob (40) counter-clockwise and
repeatedly press the piezoelectric switch-on push-button (41)
until the burner under the boiler lights up.
Check through the observation window that the burner is lit
and, after a few seconds, release the knob (40).
"Heating" now begins.
At the end of the day, switch off the machine by turning the ON/
OFF switch (1) to the "0" position and close the gas tap (40)
by turning it to the "0" position.
23
5
6
Only place cups and glasses used with the coffee machine
on the cup tray. No other objects must be placed on the tray.
Thoroughly drain the cups before placing them on the tray.
To activate the resistance of the cup warmer tray (23) press
button (6); to change the cup-warmer power, press the (6)
key a number of times.
- All LEDS (5) on = full power
- All LEDS (5) off = OFF
To desactivated the heating of tray (23) press more times the
key (6) until all the leds are off.
N.B. The heating of the cup warmer tray (23) is deactivated
during the automatic switch off phase.
The condition in effect at the time when the machine was
switched off will be restored the next time the machine
automatically switches on.
52
English
40
41
Tabla de contenido
