Tabla de contenido
English
4.
Drinks distribution - coffee
Remove the filter carrier (21 or 25), clean it of the used coffee
grounds and refill it with 1 or 2 doses of ground coffee,
according to the filter carrier used.
Press the coffee evenly in the filter, using the dose-grinder press.
Remove any coffee grounds from the edges of the filter.
Insert the filter carrier (21 or 25) to the group, locking it firmly
in place. Position the cup (or cups) under the spout (or
spouts) of the filter carrier (21 or 25).
Press the coffee distribution key (32, 33, 35 or 36)
corresponding to the desired dose. The corresponding led
lights up, the coffee will be issued and will stop automatically
upon completion.
Press the continuous/STOP distribution button (37) for a
continuous distribution.
The distribution, both dosed and continuous, may be interrupted
at any time by pressing the continuous/STOP key (37).
4.1
Drinks distribution - hot water
After having positioned the appropriate container under the
hot water nozzle (32), distribution is made in two ways.
DOSED FUNCTION
Press one of the hot water distribution keys (13a or 13c). The
corresponding led will light up, hot water will be issued and
will stop automatically upon completion.
The distribution may be interrupted at any time by pressing
the previously active key again (shown by the lighted led), or
the Stop button, continuous hot water (13b).
CONTINUOUS FUNCTION
Press the hot water distribution key (13b).
Hot water will be issued continuously until the hot water key
(13b) is pressed again to stop this function.
In continuous function the progrmmed dosed in the key is
not changed.
32
33
25
53
13a
13b
13c
English
36
35
37
10
Tabla de contenido
