Description - Hilti TE 6-A36 Manual De Instrucciones

Obligation signs
Wear eye Wear a hard
protection hat
en
Wear
breathing
protection
Symbols
Read the Return waste
operating material for
instructions recycling.
before use
Volts Direct current
Diameter Forward /
reverse

2. Description

2.1 Use of the product as directed
The TE 6-A36 is a hand-held, cordless rotary hammer for hammer drilling in concrete and masonry, drilling in
steel and wood and driving or removing screws.
Use only the batteries and chargers recommended by Hilti.
The power tool may be used only in a dry environment.
Do not use the power tool where there is a risk of fire or explosion.
Working on materials hazardous to the health (e.g. asbestos) is not permissible.
The power tool is designed for professional use and may be operated, serviced and maintained only by trained,
authorized personnel. This personnel must be informed of any special hazards that may be encountered. The
power tool and its ancillary equipment may present hazards when used incorrectly by untrained personnel or
when used not as directed.
The working environment may be as follows: construction site, workshop, renovation, conversion or new
construction.
18
Location of identification data on the power tool
The type designation can be found on the type iden-
tification plate and the serial number on the side of
the motor housing. Make a note of this data in your
operating instructions and always refer to it when
Wear ear Wear
making an enquiry to your Hilti representative or
protection protective
service department.
gloves
Type:
Generation: 03
Serial no.:
Drilling Hammer
without drilling
hammering
Rated speed Revolutions
under no load per minute