Description Of Function - Spanset NoCut sleeve Borrador De Las Instrucciones

4 Inspections, maintenance, repairs and decommissioning
5 Storage and cleaning
6 Useful information and training

1 Description of function

NoCut has been designed to protect textile lifting equipment from
®
sharp edges when hoisting loads using riggers (authorised personnel)
and is available in two designs:
NoCut
®
8
sleeve
equipment with a need for cut protection on both sides.
NoCut (cut protection discs) to affix to lifting equipment with a
®
9
pad
need for cut protection on one side only.
NoCut can be identified by the three blue marker yarns woven into
®
the material. NoCut
the NoCut range are woven from high-performance fibres.
®
2 Safety information and handling
Ensure that loads are only hoisted by people trained to do so (author-
ised personnel).
NoCut should only be used in conjunction with SpanSet lifting equip-
®
ment or lifting equipment with identical specifications.
- NoCut must not be used for purposes other than those specified.
®
All loads which exceed the load-bearing function of Nocut
expressly avoided.
- NoCut may only be used in conjunction with chemicals in cases
®
where express permission has been granted by the manufacturer.
Key information includes: chemicals, concentration, temperature
and exposure time.
- Prior to use, ensure that the part of the lifting accessory covered
with NoCut is undamaged.
®
- Do not use NoCut
16
- When using NoCut
Page
EN
10
(a woven protective sleeve) to place around lifting
must not be modified in any way. Products from
®
in temperatures below - 40°C and above + 60 °C.
®
, adhere to the professional association's regu-
®
must be
®