Spanset NoCut sleeve Borrador De Las Instrucciones página 11

and safely. Please contact your SpanSet retailer or SpanSet technical
support staff should you have any further questions. Besides a large
range of lifting accessories, www.spanset.de also features the entire
range of hoisting technology as well as other load-securing products
and personal protective equipment. Your SpanSet group of companies.
NoCut has been designed for commercial use. Do not use
®
NoCut until you have read and understood this Operation
®
Manual in full! In addition, adhere to and follow the Operation
Manual for the lifting equipment that you use together with NoCut
as well as the general regulations
This Operation Manual is to be passed on with the product. Non-ad-
herence to this manual could lead to serious accident result-
ing in the risk of injury or death!
Danger! Non-adherence to these key instructions may lead to
loss of the protective function! Serious accidents resulting in
the risk of injury or death are possible!
Please note the symbols provided on the pull-out, which are explained
by the following numbering::
Do not use any NoCut
1
Never place NoCut
2
Never apply NoCut
3
The length and width of NoCut
4
lifting accessory to be protected!
Do not place load on NoCut
5
It is expressly forbidden to slide the load into NoCut
6
Load-bearing sections must not twist, cross over or overlap in
7
NoCut !
®
Table of contents
1 Description of function
2 Safety information and handling
3 Operating NoCut
See also "Useful information and training"
1
1
products that are damaged or worn!
®
on burred or uneven edges!
®
in a twisted manner!
®
®
; do not crush NoCut
®
®
concerning the hoisting of loads.
must correspond to the area of the
,
®
!
®
!
®
Page
EN
9