Possible Misuse - Hilti VC 20M-X Manual Del Usuario

Additionally in the case of L-class vacuum cleaners
Picking up dry, non-flammable dusts, liquids, wood chips and hazardous dusts with an exposure limit value
of > 1 mg/m³ (dust class L).
3.3

Possible misuse

• Do not operate the industrial vacuum cleaner when it is laid on its side.
• Do not use the industrial vacuum cleaner to pick up substances that present a risk of explosion,
glowing, burning or flammable substances or aggressive dusts (e.g. magnesium or aluminum dust, etc.)
(exception: wood chips or shavings).
• Do not use the industrial vacuum cleaner to pick up flammable liquids (e.g. gasoline, solvents, coolants
and lubricants, etc.).
• Working with materials hazardous to the health (e.g. asbestos) is not permissible.
3.4 Status indicators on the product
Display
3.5 Operating buttons on the product
Operating button
*2268215*
Description
Change filter service indicator
When the LED lights up, the filter is clogged.
1. Check the fill level in the waste material container
2. Press the Manual filter cleaning operating button.
3. Check the filter; replace it if necessary.
Fill level monitoring
When the LED lights up, automatic cut-out in wet operating mode is active.
Empty the container and clean the sensors.
Power indicator
The LED array is an indicator for current filter status. When suction power is
at maximum, all three 3 LEDs light up.
Description
Manual filter cleaning
Press this button to perform manual cleaning of the filter.
Automatic filter cleaning
When the LED lights up, automatic filter cleaning is active.
Deactivate automatic filter cleaning by pressing the button. The LED goes
out.
Setting hose diameter (only for M-class appliances)
Press the button to set the diameter of the hose currently in use.
The setting depends on the tool that you connect and the diameter of its
suction hose adapter and has to be changed as necessary.
2268215 English 23