Abicor Binzel WH Instructivo De Servicio página 15

5 Functional Description
1
5
1 Adjusting lever and holder
2 Torch neck
Fig. 1 Installing the alignment jig
1 Fasten the alignment jig.
2 Mount (5) the clamping device and the guide device according to the bending angle to be checked (3)
on the base plate (4).
The device has been designed so that all bending angles of a torch series can be tested in one clamping
using additionally screwed on guide devices. For special torches, the alignment jig is customized.
EN - 6
2
3 Clamping body
4 Base plate
Alignment jig
3
4
5 Guide device,cmpl
with test device