Identification; Eu Declaration Of Conformity En; Responsibilities Of The User En; Product Description - Abicor Binzel WH Instructivo De Servicio

Alignment jig

1 Identification

The alignment (bending angle) of the changeable torch necks outside of the welding cell can be checked
using the alignment jig. Furthermore, it is also possible to realign the torch neck slightly with identical
clamping, for example after a collision. These operating instructions describe the handling of the alignment
jig. Handling and description of this device are the same for all torches with exception of the torch neck
fastening. The Alignment jig may only be operated using original ABICOR BINZEL spare parts.
1.1 EU Declaration of Conformity
according to the EC Directives:
Machinery Directive 2006/42/EC
We,
Alexander Binzel Schweisstechnik GmbH & Co. KG
Legal representative of the documentation: Hubert Metzger
Kiesacker 7-9, 35418 Alten-Buseck
hereby declare that, on the basis of its design and construction, the present model of the Alignment jig
described in these operating instructions complies with the basic safety and health requirements of the EC
directive. Any modification not agreed with us will void this declaration.
Designation
Relevant EC Directives
Harmonized standard applied
Tab. 1
1.2 Responsibilities of the User
Within the EEA (European Economic Area) the current version of the national implementation of the
Framework Directive (89/391/EEC) and the related individual directives and, of these, especially
Directive (89/655/EEC) concerning the minimum safety and health requirements for the use of work
equipment by workers at work must be adhered to. In Germany, the Labor Protection Law and the Company
Safety Ordinance must be heeded. In addition, the operator must ensure that the welding torch and welding
unit comply with the EC EMC Directive (04/108/EEC) and that the signal utilization of the integrated
welding current monitoring against stray currents is installed properly.

2 Product Description

2.1 Designated Use
The Alignment jig is used for testing the torch neck geometry outside of the welding cell. The Alignment jig
is a precision tool thanks to CNC machined clamping positions for fastening the clamping or guide device
for all bending angles 0°, 22°, 35°and 45°.
The Alignment jig can be used for changeable torch necks of the series ABIROB
ROBO VTS-Interlock and ABIROB W and laser wire feeders. Any use beyond that is prohibited.
Designated use also includes the observance of the prescribed operating, maintenance and servicing
conditions.
2.2 Use contrary to the designated use
Any use other than that described under "Designated Use" is considered contrary to the designated use.
Unauthorised conversions or power increase modifications are not allowed.
2.3 Technical Data
NOTE
Since the version of the Alignment jig depends on the torch type used, no technical data are listed here.
Alignment jig
Machinery Directive 2006/42/EC
DIN EN ISO 12 100
Information regarding the EU Declaration of Conformity
1 Identification
®
A / GC, ROBO WH,
EN - 3