Cutting Height Adjustment - TRAPP WM-350 Manual De Instrucciones

Warning!
When adjusting cutting height,
unplug the lawn mower and check
whether the blade has come to a
full stop before adjusting it.
To adjust the cutting height, pull the wheel
shaft to the position desired, as in the
figure:
Grass cutting
height
1 - Higher
2 - Medium
3 - Low
3
2
1

Cutting Height Adjustment

1 2 3
3
2
1
✔
To avoid engine overload, select the
cutter edge height according to yard
condition.
✔
For the types of grass used in Brazil, it is
recommended to keep them 2 and 3cm
high from soil. If lawn is excessively
high, perform 2 or more cutting with
different height adjustments. This
procedure will help to improve
equipment life, thus avoiding a blow
out due to electric engine overload.
✔
For WM-350 model (with grass-picker),
use clockwise sense to cut your lawn,
according to the illustration below.
✔
If your lawn is very high, avoid
overloading the engine by using only
half of cutter cutting range, as shown
below.
31