Cutting Height Adjustment - TRAPP WM-350 Manual De Instrucciones

www.trapp.com.br
Unplug the lawn mower.
 
Attach the blade as shown in the picture.
 
Note:
To check the balance of the blade, place a
round tube over the blade hole to check whether
the blade is balanced (as in the picture beside). If
it is not, balance it by sharpening the cutting area
until the removal of material reestablishes the
balance of the blade.
Warning!
When adjusting cutting height, unplug the
lawn mower and check whether the blade
has come to a full stop before adjusting it.
To adjust the cutting height, pull the wheel shaft
to the position desired, as in the figure:
Blade Attaching Set
Blade Balancing

Cutting Height Adjustment

Ventilated
disc
Assembly
Blade
screw
Adjustable
wrench
35
1 2 3