Cutting Height Adjustment - TRAPP MC-80G Manual De Instrucciones

The cutting height is adjusted as follows:
✔
Bend the adjustment rod in the
direction of the wheel (1) to unlock it.
After that, move it either to the right or
to the left (2), according to the height
you wish.
✔
There are 5 positions to mow the grass
at the desired height and for the grass
mower to move freely.
1
Warning!
When adjusting the cutting height,
turn off the motor and check whether
the cutting blade is still turning
before carrying out the adjustment.
✔
To avoid engine overload, select the
cutter edge height according to yard
condition.
✔
For the types of grass used in Brazil, it is
recommended to keep them 2 and 3cm
high from soil. If lawn is excessively
high, perform 2 or more cutting with
different height adjustments. This
procedure will help to improve
equipment life.

Cutting Height Adjustment

2
✔
According to cutter model (with or
without grass-holder, with side outlet),
use a cutting sense as shown in the
illustrations below.
Machines with grass-holder - Clockwise sense.
Machines with grass-holder and side outlet -
Anti-clockwise sense
✔
If your lawn is very high, avoid
overloading the engine by using only
half of cutter cutting range, as shown
below.
37