Adjusting Cutting Height - TRAPP KM 300 Manual De Instrucciones

Attention!
When adjusting cutting height,
remove plug from electrical socket,
and verify that blade has come to a
full stop before making height
setting.
Model MC - SL
To adjust cutting height proceed as
follows:
✔
Flex handle towards the wheel (1)
releasing the lock, then move handle to
the right or to the left (2) according to
desired cutting height.
1
✔
There are 5 different cutting heights.
Models KM
To adjust cutting height proceed as
follows:
✔
Flex handle towards the wheel (1)
releasing the lock, then move handle to
the right or to the left (2) according to
desired cutting height.
✔
There are 5 different cutting heights.
✔
Simultaneous adjustment of cutting
height in the 4 wheels.

Adjusting Cutting Height

2
Models TS 30B - TS 30T - TS 30S
TS 70B - TS 70T - TS 70S
To adjust cutting height pull axle toward
you and set to desire cutting height see
figure below:
Grass cutting
height
1- Higher
2- Medium
3- Lower
3
2
1
2 3
1
3
2
1
2
1
31