Product Description And Intended Use - Nice MC200 Instrucciones Y Advertencias Para La Instalación Y El Uso

• Provide a disconnection device (not supplied) in the plant's mains power supply, with a contact opening distance that ensures complete
disconnection under the conditions envisaged by Overvoltage Category III
• Handle the product with care during installation, taking care to avoid crushing, knocks, falls or contact with liquids of any kind. Keep the
product away from sources of heat and open flames. Failure to observe the above can damage the product and increase the risk of danger
or malfunctions. If this should happen, stop installation immediately and contact the Customer Service
• The manufacturer assumes no liability for damage to property, items or persons resulting from non-compliance with the assembly instructions.
In such cases the warranty does not cover material defects
•
Cleaning and maintenance to be carried out by the user must not be effected by unsupervised children
• Before intervening on the system (maintenance, cleaning), always disconnect the product from the mains power supply
• The packaging materials of the product must be disposed of in compliance with local regulations
• When performing a manoeuvre, keep an eye on the automated mechanism and keep all bystanders at a safe distance until the movement
has been completed
•
Do not operate the automation if any people in the vicinity are working on it; disconnect the power supply before permitting any work to be
carried out
1

PRODUCT DESCRIPTION AND INTENDED USE

MC200 is an electronic control unit that allows for controlling and commanding a motor designed to automate a shutter, overhead door, sectional
door, rolling shutter or other similar applications.
WARNING! - Any use other than that specified herein or in environmental conditions other than those stated in this manual is
to be considered improper and is forbidden!
Functional characteristics:
• it connects to the mains power supply (see data in the chapter, "Product technical specifications");
• it can be programmed by setting 8 dip-switches;
• it is equipped with an incorporated radio receiver that allows for controlling the automation through a radio transmitter;
• various accessories can be connected to the control unit, such as: a pair of photocells, a warning light (powered at the mains voltage) for lu-
minous warnings, a wall-mounted button to control the automation with "step-by-step"-type commands, an external radio antenna, a sensitive
edge, etc.
• it is equipped with a type "IBT4N" connector, compatible with the IBT4N interface, which allows for connecting all devices equipped with BusT4
interface, such as, for example, Oview programming units.
English – 2