Nice MC200 Instrucciones Y Advertencias Para La Instalación Y El Uso página 17

PROCEDURE F - Deleting ALL the memory and restoring the default settings
01. On the control unit: press and hold the "radio" button.
– After roughly 4 seconds the "radio" LED lights up steady (continue holding the button down).
– After roughly 4 seconds the "radio" LED turns off (continue holding the button down).
02. When the "radio" LED starts flashing, count 4 flashes and prepare to release the button precisely during the 5
03. After the deletion, the "radio" LED flashes fast.
04. Lastly, the "radio" LED emits 5 long flashes to signal that the deletion has been successful.
PROCEDURE G - Locking (or releasing) the memory
WARNING! - This procedure locks the memory by preventing the execution of Procedures A, B, C, D, F.
01.
Disconnect the control unit from the power supply.
02. On the control unit: press and hold the "radio" button then power the control unit (continue holding the button down).
03. After 5 seconds the "radio" LED emits 2 slow flashes; release the button.
04. (within 5 seconds) On the control unit: repeatedly press the "radio" button to choose one of the following options:
• LED off = Deactivation of the memory lock.
• LED on = Activation of the memory lock.
05. Five seconds after last pressing the button, the "radio" LED emits 2 slow flashes to signal the end of the procedure.
flash that follows.
th
English – 16