Utilitech 148012 Manual De Instrucciones página 14

2. To connect the pressure switch, remove the
switch cover and insert an electrical wire
strain relief (not included) into the opening in
the side of the pressure switch.
3. Thread the electrical wire (not included) from
the power supply through the strain relief and
tighten both screws on the strain relief. Do
not crush wire.
4. Connect the two wires from the power supply
to the two outside terminals on the pressure
switch.
2
Strain
relief
Pressure
switch
3
Wire from
power
supply
4
Wire from
power
supply
Two wires
from power
supply
Outside
terminal
14
Wire from
motor
IL1376
Wire from
motor
Wire from
motor
Outside
terminal