Description Of Function - Bosch TCE 5330 Manual Del Usuario

en 28 | TCE 5330 | Product description
Pos. Name
5 Locking flange control
6 Pedal
7 Mandrel-holding arm
8 Locking flange
9 Locking jaws
10 Platform
11 Trolley
12 Working arm
13 Mounting tool
14 Bead breaker disk
15 Mounting tool pin
16 Bead breaker disk pin
17 Main switch
18 Locking flange rotati-
on speed selector
19 Start button
20 Emergency button
21 Oil level indicator
22 Hydraulic pressure knob
23 Hydraulic manometer
24 Warning light of
the gearbox oil
25 Working arm flow regulator
26 Working arm flow regulator
3.6

Description of function

Below are reported the main functions of the listed
components of the TCE 5330:
+
The remote control allows the operator to control re-
motely the operations of the TCE 5330 by means of
the controls and the pedal. The control is fitted with
a radio device which allows wireless remote control
of the operations.
+
The mandrel assembly permits locking and rotation
of the rim; it is hydraulically driven and it is compo-
sed of the mandrel holding arm and of the locking
flange (with locking jaws).
+
The working assembly allows bead breaking, tire
demounting and mounting operations; it is hydrauli-
cally driven and it is composed of: platform, trolley,
working arm with mounting tool and bead breaking
disk (and relative pins).
+
The electric-hydraulic system permits starting, tur-
ning off and adjustment of the hydraulic pressure of
the TCE 5330.
|
1 695 301 841 2010-02-16
Function
Locking flange activation:
+ Left movement of the lever opens the jaws of the locking flange.
+ Right movement of the lever closes the jaws of the locking flange.
Locking flange rotation:
+ 6a. Clockwise rotation of the locking flange:
+ 6b. Counter-clockwise rotation of the locking flange:
Upward and downward movement of the locking flange.
Hydraulic locking of the rim and clockwise and counter-clockwise rotation.
Rim locking (with different fitting possibilities).
Positioning of the wheel before and after tire mounting and demounting operations.
Horizontal translation of the working arm.
Positioning of the mounting tool and of the bead breaking disk.
Demounting and mounting of the tire
Removal of the tire from its seat on the rim.
Positioning of the mounting tool.
Bead breaking disk positioning.
TCE 5330 starting and turning off.
Locking flange rotation speed selection
TCE 5330 starting.
TCE 5330 emergency shut-off.
TCE 5330 oil level indication.
Adjustment of the mandrel working pressure.
Indication of the machine hydraulic pressure.
Indication that the gearbox oil is at its minimum level.
Pneumatic adjustment of the upward and downward motion of the working arm
Pneumatic adjustment of tool rotation speed.
Robert Bosch GmbH