Tabla de contenido
Idiomas disponibles
Idiomas disponibles
en | 10 | SCT 17
ries and genuine spare parts. Otherwise, all warranty
claims will be rendered null and void.
---Separator---
2.
Product description
2.1
---Separator---
Intended use
The SCT 17 is a camera-based alignment system for the
adjustment devices SCT 415 and SCT 416. The SCT 17
replaces the line laser P-Assist S5. The SCT 17 is used
to position adjustment devices in front of the vehicle in
such a way that front camera systems can be calibra‐
ted. For the calibration of front camera systems, manu‐
facturer-specific calibration boards and calibration
software such as ESI[tronic] 2.0 are required addition‐
ally.
---Separator---
2.2
Scope of delivery
Denomination
Camera with USB connection cable and QR
code
Holder for laptop/tablet
Camera bracket
Clamp for camera bracket
Alignment aid
Reference board
USB stick with Bosch ADAS Positioning soft‐
ware*
Original instructions
3 adhesive pads
4 cable ties
---Separator---
* Only included in the scope of delivery until October 2019, then
installation by Diagnostics Download Manager (DDM)
---Separator---
2.3
Prerequisites
Camera installation
Adjustment device SCT 415 or SCT 416
---Separator---
Bosch ADAS Positioning software
We recommend and support the DCU 220 as a
laptop or the KTS 350 tablet for use with
Bosch ADAS Positioning.
• Operating system: Windows 7, Windows 10
• Minimum resolution: 1024 x 600 pixels
• RAM: 4 GB DDR RAM
• WLAN
• At least one free USB port
---Separator---
Diagnostic software
ESI[tronic] 2.0 software with the control unit diagnosis
ESI[tronic] info type for calibrating front camera sys‐
tems and front radar sensors
---Separator---
1 689 989 391 | 2018-08-01
2.4
SCT 17 overview
1
4
Order number
1 685 115 165
(1) Camera
(2) Camera bracket
1 688 005 261
(3) Clamp for camera bracket
1 688 018 057
(4) Holder for laptop/tablet
(5) Reference board
1 681 321 369
(6) Alignment aid
1 681 098 009
(7) Pointer
---Separator---
1 681 098 012
2.5
Functional description
1 687 370 329
For the calibration of front camera systems, a calibra‐
tion board must be aligned with the front of the vehicle
1 689 989 391
according to the manufacturer's specifications. The ad‐
justment device must be positioned at a vehicle-specif-
1 681 010 032
ic distance from the front of the vehicle and centered.
1 681 316 008
Distance measurement using the camera and refer‐
ence board
The camera and reference board are used for distance
measurement. The camera measures the distance of
the adjustment device from the reference board.
(1) Camera
(2) Reference board on alignment aid
(3) Distance between adjustment device and reference board
Usually, the distance between the adjustment device
and the vehicle is measured from the wheel hub or
bumper to calibrate front camera systems. Conse‐
quently, the reference board on the alignment aid must
be placed at the same height as the wheel hub or
bumper. This is specified in the manufacturer-specific
short instructions and ESI[tronic] 2.0.
The vehicle-specific distance must be entered into the
input box
(2)
display
2
3
1
3
(1)
in Bosch ADAS Positioning. The distance
will indicate the current distance. If the dis‐
5
6
7
2
Robert Bosch GmbH
Capítulos
Tabla de contenido
