How To Assemble; Before First Use - Hamilton Beach 67951 Manual De Instrucciones

How to Assemble

1
Make sure that this unit is unplugged before assembling. While
pressing the RELEASE button, place the juicer chute onto the base by
twisting counterclockwise. Twist the auger clockwise into position
inside the juicer chute.
5
Place the funnel on top of the
juicer chute.
2
6
Slide froth separator into corner of
juice container. This prevents any
foam from pouring into the juice.
BEFORE FIRST USE: After unpacking the juice extractor, remove
cardboard from strainer and wash everything except the base in warm,
soapy water. Rinse and dry immediately. Never immerse the base in
water or other liquids; wipe it with a damp sponge.
3
Slide the strainer over the auger.
7
Place the juice container onto the
base ledge.
4
Place the juicer cap over
the strainer by twisting
counterclockwise.
8
Place the pulp container on
the counter next to the juice
container.
5