How To Assemble - Hamilton Beach 67840 Manual De Instrucciones

How to Assemble

1. Place Strainer Bowl on top of
the Motor Base. Then place the
Stainless Steel Strainer Basket
inside the Strainer Bowl.
5. Place the Pulp Container into
position by tilting the Container
slightly.
Strainer Basket
2. With hands on outer edge, press
Strainer Basket down firmly to
latch into position.
6. Place Juicing Container with Container Lid under the Juice Spout. Slide
the Food Pusher down the Feed Chute by aligning the groove in the Food
Pusher with the small ridge on the inside of the top of the Feed Chute.
Before first use: After unpacking the Juice Extractor, remove
cardboard from filter basket and wash everything except the base in
warm, soapy water. Rinse and dry immediately. Never immerse the
base in water or other liquids; wipe it with a damp sponge.
3. Place the Juicer Cover over the
Strainer Bowl, positioning the
Feed Chute over the Strainer
Basket, and lower into position.
Small ridge
inside Feed
Chute
4. Raise Locking Arm up and over
indentation in Juicer Cover until it
clicks into place.
HINT: To minimize cleanup, place
a plastic grocery bag in the Pulp
Container to collect the pulp. (See
page 6 for more information.)
5