Philips HEARTSTART TRAINING PADS II Manual De Instrucciones página 15

placement for infants and young children differs from placement on adults.)
Press the pad down firmly.
6. Then remove the other pad from the case and place it. (It does not matter
which pad is placed first or which pad is placed in which position.)
PRECAUTION: Do not place the pads on a person.
7. Continue to follow the FRx instructions for remainder of scenario.
8. When the scenario has been completed, or to stop a scenario in process,
press the On/Off button until the defibrillator turns off.
9. To repeat the same scenario, replace the pads in their case, then begin again
by pressing the On/Off button. As long as the battery has not been
removed, the defibrillator will automatically use the previously selected
scenario. To select a different scenario, press the i-button. Each time the
battery is inserted, the defibrillator will default to scenario number 1.
NOTE: To turn off the defibrillator at any time, press and hold the On/Off
button until the defibrillator turns off.
DEFIBRILLATOR PERFORMANCE DURING TRAINING
When a training scenario is running, the defibrillator behaves exactly as it would
during actual emergency use, providing voice instructions, one or more
simulated shocks, pauses for CPR, optional CPR guidance, etc.
For safety reasons, certain defibrillator features are not functional while the
training pads are installed:
• The defibrillator cannot be used for actual patient care; it cannot
analyze patient heart rhythm or deliver a shock.
• It will not perform the battery insertion and periodic self-tests.
• If it is not used (no buttons are pressed and the connector is not
removed) for one hour with the training pads connected, the
defibrillator will start "chirping" to alert the user to either continue the
training use or remove the training pads and connect a set of
HeartStart SMART Pads II.
* A Precaution is a condition, hazard, or unsafe practice that could result in minor
personal injury.
† If the FRx configuration has been changed from the default settings, the modifications
are applied to its behavior during the training simulations.
*
†
7