Certificates - Parker 650 Serie Manual De Producto

10-4
Certification for the Drive

Certificates

Issued for
compliance In accordance with the EEC Directive
with the EMC
Directive when
We Parker Hannifin Manufacturing Limited,
the unit is used
address as below, declare under our sole
as relevant
responsibility that the above Electronic
apparatus.
Products when installed and operated with
reference to the instructions in the Product
Manual (provided with each piece of
equipment) is in accordance with the relevant
clauses from the following standard:-
This is
provided to aid We Parker Hannifin Manufacturing Limited,
address as below, declare under our sole
your
responsibility that the above Electronic
justification for
Products when installed and operated with
EMC
reference to the instructions in the Product
compliance
Manual (provided with each piece of
when the unit
equipment) is in accordance with the relevant
is used as a
clauses from the following standard:-
component.
Parker Hannifin Manufacturing Ltd., Automation Group, SSD Drives Europe,
NEW COURTWICK LANE, LITTLEHAMPTON, WEST SUSSEX BN17 7RZ
TELEPHONE: +44(0)1903 737000
Registered Number: 4806503 England.
650 0.25 - 4.0
EC D
ECLARATIONS OF
Date CE marked first applied: 26/07/2001
EMC Directive
2004/108/EC
BSEN61800-3 (2004)
M
ANUFACTURERS
EMC Declaration
BSEN61800-3 (2004)
Dr Martin Payn (
Registered Office: 55 Maylands Avenue, Hemel Hempstead, Herts HP2 4SJ
W 230V
K
C
ONFORMITY
Low Voltage Directive
In accordance with the EEC Directive
2006/95/EC
We Parker Hannifin Manufacturing Limited,
address as below, declare under our sole
responsibility that the above Electronic
Products when installed and operated with
reference to the instructions in the Product
Manual (provided with each piece of
equipment), is in accordance with the following
standard :-
EN61800 (2007)
D
ECLARATIONS
Machinery Directive
The above Electronic Products are components
to be incorporated into machinery and may not
be operated alone.
The complete machinery or installation using
this equipment may only be put into service
when the safety considerations of the Directive
2006/42/EC are fully adhered to.
Particular reference should be made to
EN60204-1 (Safety of Machinery - Electrical
Equipment of Machines).
All instructions, warnings and safety
information of the Product Manual must be
adhered to.
Conformance Officer)
FAX: +44(0)1903 737100
The drive is CE
marked in
accordance with
the low voltage
directive for
electrical
equipment and
appliances in the
voltage range
when installed
correctly.
Since the
potential hazards
are mainly
electrical rather
than mechanical,
the drive does not
fall under the
machinery
directive.
However, we do
supply a
manufacturer's
declaration for
when the drive is
used(as a
component) in
machinery.
650 Series AC Drive