Electrical Instructions - ProTeam GoCartVac Manual Del Propietário

ELECTRICAL INSTRUCTIONS

This appliance is for use on a nominal 120-volt circuit, and has a grounded plug that looks
like the plug illustrated in sketch A in Figure AA. A temporary adaptor that looks like the
adaptor illustrated in sketches B and C may be used to connect this plug to a 2-pole recep-
tacle as shown in sketch B if a properly grounded outlet is not available. The temporary
adaptor should be used only until a properly grounded outlet (sketch A) can be installed by a
qualified electrician. The green colored rigid ear, lug, or the like extending from the adaptor
must be connected to a permanent ground such as a properly grounded outlet box cover.
Whenever the adaptor is used, it must be held in place by a metal screw.
Note: In Canada, the use of a temporary adaptor is not permitted by the Canadian Electrical Code.
GROUNDED
OUTLET
GROUNDING
PIN
Figure AA
WHEN CONNECTED TO AC POWER OUTLET
This GoCartVac must be grounded for AC operation and battery recharging. If it should mal-
function or break down, grounding provides a path of least resistance for electric current to
reduce the risk of electric shock.
The GoCartVac is equipped with a AC power receptacle and extension cord having an
equipment-grounding conductor and grounding plug. The plug must be inserted into an
appropriate outlet properly installed and grounded in accordance with all local codes and
ordinances.
EXTENSION CORDS
Use only three-wire ProTeam approved SJTW, UL/CSA, 16AWG or larger, extension cords
that have three-prong grounding type plugs and grounded receptacles that accept the appli-
ance's plug. Replace or repair any damaged cords or plugs. Use only authorized ProTeam
replacement parts.
ProTeam
GROUNDED
OUTLET BOX
SKETCH A
(A)
ADAPTER
METAL
SCREW
GROUNDING SCREW
SKETCH B
(B)
TAB FOR
SKETCH C
(C)
4