Hamilton KHAKI X-WIND Quartz Chronograph GMT Instruction Manual página 8

CHRONOGRAPH FUNCTIONS
Remark: before starting a timing operation, the hands
should be reset to zero. If necessary, press button
Simple timing
button : Start
A
button : Stop
A
> Read time
button : Reset to zero
B
Timing with intermediate times*
button : Start
A
button : Intermediate stop
B
> Read 1st intermediate time
button : Restart with catch-up of elapsed time
B
button : Intermediate stop
B
> Read 2nd intermediate time
And so on...
Finally, press button
A
the total time.
button : Reset to zero
B
* Only on the Quartz Chronograph GMT model
4
to stop the timing and read
CROSSWIND FUNCTIONS
The Khaki X-Wind models are equipped with a calcu-
. lator of angle of drift, which allows pilots to determine
B
the bearing corrections to apply in case of crosswind.
Remark: It is necessary to unscrew crowns
in order to carry out the procedure described below.
Procedure
1. position the arrow
upper interior rotating bezel
at 12 o'clock by adjusting with
crown .
D
2. Adjust the lower interior ro-
tating bezel to 0° by adjusting
with crown .
E
3. Obtain wind speed and direction from control tower
or weather chart.
Ex. Wind speed: 40 mph
Wind direction: 70°
4. Indicate wind direction (70) in
the window with the upper in-
terior rotating bezel by adjusting
with crown .
D
5. Adjust the exterior rotating
bezel so that one tenth of the
speed of the aircraft is indicated
opposite the arrow .
Ex. Aircraft speed:
180 mph – indicate 18.
and
D
of the
© HAMILTON - SepTeMbeR 2016
E