Hamilton KHAKI X-WIND Quartz Chronograph GMT Instruction Manual página 7

ADJUSTMENTS
Adjustment of the date and/or the day
1. Unscrew the crown
C
(p2).
2. According to the model, turn the crown clockwise
or counterclockwise to adjust to the desired date and/
or day.
3. push the crown back in and screw it down.
Remark concerning the Automatic Chronograph model:
please do not adjust the date or the day between 8
p.m. and 2 a.m. (20:00 and 02:00).
Adjustment of hours and minutes
1. Unscrew the crown
C
(p3).
2. Turn the crown to adjust to the desired time in hours
and minutes.
3. push the crown back in: the seconds hand will
restart.
4. push the crown back in and screw it down.
Adjustment of GMT (Greenwich Mean Time)*
1. Unscrew the crown
C
(p3).
2. press button to advance the GMT 24-hour hand,
A
or button to move it backwards. At each press,
B
the hand advances or goes backwards by 15 min-
utes. A long press causes rapid rotation of the hand.
3. push the crown back in and screw it down.
* Only on the Quartz Chronograph GMT model
M044 - INSTRUCTION MANUAL
and pull it out to position
and pull it out to position
and pull it out to position
Adjustment of the counter hands*
After a battery change or a violent shock, it is possible
that one or more counter hands or a disk are no longer
exactly at zero or aligned. If this is the case, proceed as
follows to adjust them:
1. Unscrew the crown
C
(p2): the 60-second counter hand will rotate 360°.
2. press button to reset the 60-second counter
B
hand to zero. At each press, the hand advances by
1 second. A long press causes rapid rotation of the
hand.
3. press button to proceed to adjustment of the
A
minutes and hours counter.
4. press button to reset the counter hands to zero.
B
At each press, the hand advances by 1 minute. A
long press causes rapid rotation of the hands.
5. push the crown back in and screw it down.
* Only on the Quartz Chronograph GMT model
IMPORTANT: In order to ensure the water-resistance of
your watch, always screw the crown back down to
position (p0) after any manipulation of it.
and pull it out to position
3