Riester EliteVue Instrucciones Para El Uso página 35

Note 1: At 80 MHz and 800 MHz, the higher frequency range applies.
Note 2: These guidelines may not apply in all situations. The electromagnetic propagation is
affected by absorption and reflection by structures, objects and people.
a.Field strengths of fixed transmitters, such as base stations for radio (cellular/cordless)
telephones and land mobile radios, amateur radio, AM and FM broadcast and television
transmission cannot be theoretically predicted with accuracy. To evaluate the electromag-
netic environment based on fixed RF transmitters, an electromagnetic assessment should
be considered. If the measured field strength at the location where the ri-scope L/EliteVue is
used exceeds the above-mentioned RF degree of compliance, the ri-scope L/EliteVue should
be observed to ensure normal operation. If abnormal performance is observed, additional
measures may be required, such as reorienting or moving the ri-scope L/EliteVue.
Recommended distances between portable and mobile RF communications equipment and
the ri-scope® L/EliteVue.
Recommended distances between portable and mobile RF communications equipment and
the ri-scope® L/EliteVue.
The ri-scope L/EliteVue is intended for use in an electromagnetic environment in which RF
emissions are controlled. The customer or user of the ri-scope L/EliteVue can help to avoid
electromagnetic interference by observing the minimum distance between portable and mo-
bile RF communications equipment (transmitters) and the ri-scope L/EliteVue in accordance
with the maximum output power of the communication equipment.
Rated maximum
output power of the
transmitter
(W)
0,01
0,1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended
distance in metres (m) can be estimated using the equation applicable to the frequency of
the transmitter, where P is the maximum output power rating of the transmitter in watts (W)
according to the transmitter manufacturer.
Note 1: At 80 MHz and 800 MHz, the separation distance applies to the higher frequency
range.
Note 2: These guidelines may not apply in all situations. The electromagnetic
propagation is affected by absorption and reflection by structures,objects and people.
Separation distance according to the frequency of the transmitter
(m)
150 kHz - 80 MHz
0,12
0,38
1,2
3,8
12
80 MHz - 800 MHz
0,12
0,38
1,2
3,8
12
800 MHz - 2,7 GHz
0,23
0,73
2,3
7,3
23
35