Dc Voltage Measurements - koban KMD-11 Manual Del Usuario

KMD-11
AUTORANGING MULTIMETER
will update only when a new "min" occurs.
3. To exit MAX/MIN mode press and hold the MAX/MIN key for 2
seconds
DISPLAY BACKLIGHT
Press and hold the HOLD key for >1 second to turn on or off the
display backlight function. The backlight will automatically turn off
after 10 seconds.
HOLD
The hold function freezes the reading in the display. Press the HOLD
key momentarily to activate or to exit the HOLD function.
Hz/duty
1. Switch to Hz/Duty range.
2. Press the Hz/Duty button to show the reading in the display
and the "Hz/Duty" indicator will appear on the display.

DC VOLTAGE MEASUREMENTS

CAUTION: Do not measure DC voltages if a motor on the circuit is
being switched ON or OFF. Large voltage surges may occur that can
damage the meter.
1. Set the function switch to the V DC position .
2. Insert the black test lead banana plug into the negative (COM) jack
14 www.grupotemper.com