koban KMD-11 Manual Del Usuario página 89

measurements. For measurement situations requiring that a range be
manually selected, perform the following:
1. Press the RANGE key. The "AUTO" display indicator will turn off
or select diode /beeper, AC/DC Clamp
2. Press the RANGE key to step through the available ranges until you
select the range you want.
3. To exit the Manual Ranging mode and return to Autoranging, press
and hold the RANGE key for 2 seconds.
Note: Manual ranging does not apply for the Frequency functions.
MAX/MIN
Note: When using the MAX/MIN function in Autoranging mode, the
meter will "lock" into the range that is displayed on the LCD
when MAX/MIN is activated. If a MAX/Min reading exceeds
that range, an "OL" will be displayed. Select the desired range
BEFORE entering MAX/MIN mode.
1. Press the MAX/MIN key to activate the MAX/MIN recording mode.
The display icon "MAX" will appear. The meter will display and hold
the maximum reading and will update only when a new "max"
occurs.
2. Press the MAX/MIN key again and the display icon "MIN" will
appear. The meter will display and hold the minimum reading and
www.grupotemper.com
AUTORANGING MULTIMETER
KMD-11
13