Outline And Dimensions - Siemens XCT-8 Instrucciones De Operación

Outline and Dimensions

Ferrule Considerations
The primary customer requirement is
a 4" sanitary ferrule welded to a short
standpipe on the top of the tank. The
inner standpipe wall and ends must
be smooth and free of burrs, ridges,
or seams, and must comply with all
applicable regulations.
The standpipe extension between
the mating ferrule and the tank top
cannot be longer than the blanking
distance as determined by the
Siemens Milltronics transceiver. The
blanking distance is the minimum
possible measurement range listed in
Specifications
the
Do not over tighten the mounting.
Hand tightening of the mounting
hardware is sufficient.
Page EN-4 XCT-8 Sanitary Transducer– INSTRUCTION MANUAL
1" BSP
or
1" NPT
119 mm
(4.68")
on page 3.
122 mm
(4.8")
radiating PTFE face
XCT-8
transducer
sanitary
clamp
standpipe
topped with 4"
ferrule
blanking
distance
7ML19985HX62