Tabla de contenido
Idiomas disponibles
Idiomas disponibles
WARNING:
YOUR SAFETY IS IMPORTANT TO YOU AND TO
OTHERS, SO PLEASE READ THESE INSTRUCTIONS
BEFORE YOU OPERATE THIS HEATER.
GENERAL HAZARD WARNING:
FAILURE TO COMPLY WITH THE PRECAUTIONS AND
INSTRUCTIONS PROVIDED WITH THIS HEATER CAN
RESULT IN DEATH, SERIOUS BODILY INJURY AND
PROPERTY LOSS OR DAMAGE FROM HAZARDS OF
FIRE, EXPLOSION, BURN, ASPHYXIATION, CARBON
MONOXIDE POISONING, AND/OR ELECTRICAL SHOCK.
ONLY PERSONS WHO CAN UNDERSTAND AND
FOLLOW THE INSTRUCTIONS SHOULD USE OR SERVICE
THIS HEATER.
IF YOU NEED ASSISTANCE OR HEATER INFORMATION
SUCH AS AN INSTRUCTIONS MANUAL, LABELS, ETC.,
CONTACT THE MANUFACTURER.
CONTENTS
SECTION 1 INTRODUCTION ...................................2
SECTION 2 PLANNING ...........................................3
SECTION 4 ENGINEERING SPECIFICATIONS ............9
SECTION 5 AIR INTAKE / VENTING ........................9
SECTION 6 GAS PIPING . ....................................... 1 1
SECTION 7 WIRING . ............................................. 1 1
SECTION 8 OPERATION MAINTENANCE . .............. 13
SECTION 9 TROUBLESHOOTING . .......................... 13
ACCESSORY PARTS .............................................. 14
SECTION 10 REPLACEMENT PARTS ....................... 15
WARRANTY INFORMATION .................................20
Enerco | Heatstar AG Series Heater
WARNING:
FIRE, BURN, INHALATION, AND EXPLOSION HAZARD.
KEEP SOLID COMBUSTIBLES SUCH AS BUILDING
MATERIALS, PAPER OR CARDBOARD A SAFE DISTANCE
AWAY FROM THE HEATER AS RECOMMENDED BY THE
INSTRUCTIONS. NEVER USE THE HEATER IN SPACES
WHICH DO OR MAY CONTAIN VOLATILE OR AIRBORNE
COMBUSTIBLES, OR PRODUCTS SUCH AS GASOLINE,
SOLVENTS, PAINT THINNER, DUST PARTICLES OR
UNKNOWN CHEMICALS.
WARNING:
THIS PRODUCT CAN EXPOSE YOU TO CHEMICALS
INCLUDING LEAD AND LEAD COMPOUNDS,
WHICH ARE KNOWN TO THE STATE OF CALIFORNIA
TO CAUSE CANCER AND BIRTH DEFECTS OR OTHER
REPRODUCTIVE HARM. FOR MORE INFORMATION
VISIT WWW.P65WARNINGS.CA.GOV
SECTION 1:Introduction
JET models are low-cost, field assembled infrared heaters that are
easy to install and require only minimal maintenance. They are
designed to provide years of economical operation and trouble-
free service.
Checking Shipment
Check the shipment against the Bill of Lading for shortages.
Also, check for external damage to cartons. Note any shortages,
and/or external damage to cartons on the Bill of Lading in
the presence of the delivery trucker. The delivery trucker
should acknowledge any shortages or damage by initializing
this "noted" Bill of Lading. Immediately report any claims for
damaged material, or shortages that were not evident at the
time of shipment, to the carrier and your Heatstar, Inc Factory
Representative.
Installer Responsibility
All heaters and associated gas piping should be installed in
accordance with applicable specifications and this installation
made only by firms (or individuals) well qualified in this type of
work. Consult local building inspectors, Fire Marshals or your
local Heatstar, Inc Factory Representative for guidance.
JET heaters are installed on the basis of information given in
a layout drawing, which together with the cited codes and
regulations, comprise the basic information needed to complete
the installation. The installer must furnish all needed material that
is not furnished as standard equipment, and it is his responsibility
to see that such materials, as well as the installation methods he
uses result in a job that is workmanlike and in compliance with all
applicable codes.
Heatstar, Inc Factory Representatives have had training and
experience in the application of this equipment and can be called
on for suggestions about installation which can save material and
cost.
2
Operating Instructions and Owner's Manual
Capítulos
Tabla de contenido
