Technical Data - Scheppach AB1900 Traducción Del Manual De Instrucciones Original

• Do not machine any materials that pres-
ent a danger to health (e.g. asbestos).
• When working in walls ceiling, or floor,
take care to avoid electric cables and
gas or waterpipes.
• Please turn the device immediately off
when the tool used gets blocked! Do not
turn the device on again when the tool is
still blocked. This could cause bounce
back with a high reaction moment. De-
termine and remove the cause of the
blocking of the tool used while respect-
ing the safety instructions.
The possible causes may be:
• it is tilted in the workpiece to be ma-
chined
• it has pierced through the material to
be machined
• the power tool is overloaded
• Do not reach into the machine while it
is running.
• Chips and splinters must not be re-
moved while the machine is running.
WARNING! Danger of burns
The insertion tool may become hot dur-
ing use.
• when changing tools
• when setting the device down
Warning! This electric tool generates an
electromagnetic field during operation. This
field can impair active or passive medical
implants under certain conditions. In order
to prevent the risk of serious or deadly in-
juries, we recommend that persons with
medical implants consult with their physi-
cian and the manufacturer of the medical
implant prior to operating the electric tool.
26 | GB
 www.scheppach.com /  [email protected] /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

6. Technical data

Blow rate
Dimensions L x W
x H
Blowing force
Weight
Motor V/Hz
Power consumption
P1
Protection class
Type of Protection
Tool fitting
Technical modifications subject to change!
Sound and vibration
Sound and vibration values were meas-
ured in accordance with EN 60745.
Sound pressure level L
Uncertainty K
pA
Sound power level
L
WA(guaranteed)
Uncertainty K
WA
Wear ear-muffs.
The impact of noise can cause damage to
hearing.
Total vibration values (vector sum of three
directions) determined in accordance with
EN 60745.
2000 min
-1
674 x 155,3 x
264,3 mm
60 Joule
16,5 kg
230-240 V~ 50 Hz
1900 W
II
IPX0
SDS-HEX
System 30 mm
81,6 dB(A)
pA
3 dB
105 dB(A)
2,73 dB