Intended Use; Technical Data - Scheppach HTB400-Li18V Manual De Instrucciones

• On completing the work, always disconnect the
device from the mains before all cleaning and
maintenance tasks or when taking a break.
• If the blades have become jammed, always turn
off the device first before trying to free them.
• If you are interrupted whilst working with the
hedge trimmer, always complete the current task
first, then turn off the device before taking care of
the interruption.
• Untrained operators or children must not use the
hedge trimmer.
Safety notices for the charger
• Keep the charger away from rain and wet condi-
tions. Water ingress into the charger increases the
risk of an electric shock.
• Keep the charger clean. Dirt increases the risk of
an electric shock.
• Before every use, check the charger, cable and
plug. Do not use the charger if you notice any
damage. Do not open the charger yourself but
have it repaired exclusively by qualified special-
ists and only with original spare parts. Damaged
chargers, cables and plugs increase the risk of elec-
tric shock. Do not place objects on the charger and
do not put the charger on soft surfaces. Risk of fire
• Always check if the mains voltage corresponds
with the voltage specified on the rating plate of
the charger.
• Never use the charger if the cable, plug or the
charger itself have been damaged by external
influences. Take the charger to the nearest special-
ist service centre
• Do not open the charger under any circumstanc-
es. In the event of a fault, take it to a specialist
service centre.
Safety notices for Li-Ion batteries
• Do not open the battery. Risk of short-circuiting!
• Protect the battery from heat, e.g. from constant
sun exposure, and from fire, water and humidity.
Risk of explosion.
• Protect the battery from heat, e.g. from constant
sun exposure, and from fire, water and humidity.
Risk of explosion.
• When the battery has been damaged or it is
being used inappropriately, fumes can be re-
leased. Let fresh air in and consult a doctor if the
fumes cause you any problems. The fumes can
irritate the respiratory
• Only use original batteries with the voltage
specified on the rating plate of your power tool.
If other batteries are used, e.g. imitations, recondi-
tioned batteries or products from third party manu-
facturers, there is a risk of personal injury as well
as property damage based on exploding batteries.
• The battery voltage must correspond with the
battery charging voltage of the charger. Other-
wise, there is a risk of fire and explosion.
• The battery voltage must correspond with the
battery charging voltage of the charger. Other-
wise, there is a risk of fire and explosion.
• Charge the batteries only in chargers that
have been recommended by the manufacturer.
There is a risk of fire if a charger for a particular
type of battery is used for another type of battery.
14 І 56
 www.scheppach.com  [email protected]  +(49)-08223-4002-99  +(49)-08223-4002-58
tract.
• The battery can be damaged by sharp objects
such as a nail or screwdriver or by external ap-
plication of force. The battery may short-circuit and
start burning, smoking, exploding or overheating.
Warning! This electric tool generates an electro-
magnetic field during operation. This field can impair
active or passive medical implants under certain
conditions. In order to prevent the risk of serious or
deadly injuries, we recommend that persons with
medical implants consult with their physician and the
manufacturer of the medical implant prior to operat-
ing the electric tool.

Intended use

The hedge trimmer may be used only for cutting
hedges, bushes and shrubs.
The equipment may be used only for the tasks it is
designed to handle. Any other use is deemed to be a
case of misuse. The user/operator and not the manu-
facturer will be liable for any damage or injuries of any
kind resulting from such misuse.
Please note that our equipment has not been de-
signed for use in commercial, trade or industri-
al applications. Our warranty will be voided if the
equipment is used in commercial, trade or industrial
businesses or for equivalent purposes.

Technical data

Nominal voltage
Cutting length
Cut/min
Weight
Noise and vibration
The noise and vibration values were developed using
a standardised measuring process.
Sound pressure L
pA
Uncertainty K
pA
Sound power L
wA
(measured)
Sound power L
wA
(guaranteed)
Uncertainty K
WA
Vibration a
h
Uncertainty K
Wear ear-muffs.
The impact of noise can cause damage to
18 V
440 mm
1100
2,2 kg
75,2 dB(A)
3 dB(A)
86,2 dB(A)
92 dB(A)
3 dB(A)
0,933 m/s²
1,5 m/s²
hearing..