Installing Batteries - HoMedics BPA-065 Manual Del Usuario

INSTALLING BATTERIES

1. Press down on latch and lift the battery cover to open the
battery compartment.
2. Install or replace 4 AA sized alkaline batteries in the
battery compartment according to the indications inside
the compartment.
3. Close the battery cover by pushing in the top end of the
battery door.
Replace the batteries if:
• The weak battery symbol appears on the display.
• Nothing appears on the display when the power is switched on.
Note:
• Date and time will need to be reset if batteries are removed
or replaced.
• Replace all batteries at one time (as simultaneous set). Use
only 1.5V AA alkaline batteries. Use only the size and type of
batteries specified.
• When installing batteries, observe proper +/- polarities. Incorrect
installation of batteries may cause damage to the unit.
• When the batteries are removed, the measurement values
stored in the memory are retained. However, the date and time
must be reset.
• Remove batteries when unit is not in use for extended periods of
time to prevent damage due to possible leakage.
• Clean contacts on battery and in battery compartment with a
soft, dry cloth each time you install batteries.
Battery
Cover
11