AVM FRITZ! 1200 Guía De Instalación Y Operación página 5

If the LED starts fl ashing slowly green again, the connection was not
established. Repeat the connection instructions starting from step 3.
5. Insert the FRITZ!Repeater into an outlet located about halfway between
the FRITZ!Box and the wireless devices to be added to the wireless
network. The FRITZ!Repeater and your FRITZ!Box connect once more.
As soon as the connection has been established, the LED lights up. The
FRITZ!Repeater 1200 is ready for operation.
5
WiFi
LED lights up green: the FRITZ!Repeater
has a good wireless connection and is
ready for operation.
LED lights up orange: the FRITZ!Repeater
has a weak wireless LAN connection. Plug
the FRITZ!Repeater into an outlet closer to
your FRITZ!Box.
LED fl ashing orange: cannot connect via
wireless LAN. Plug the FRITZ!Repeater
into an outlet closer to your FRITZ!Box.
With the FRITZ!App WLAN you can determine the optimum position
for your FRITZ!Repeater in the home network of your FRITZ!Box.
8
WiFi
Wireless Bridge: Connect the FRITZ!Repeater 1200
to the Wireless Router using the Wizard
If your wireless router does not support WPS (Wi-Fi Protected Setup), use
the Confi guration Wizard to set up the connection.
1
Connecting to the Computer
1. Plug the FRITZ!Repeater 1200 into an outlet near your wireless router
(for instance, FRITZ!Box).
2. Wait until the LED starts slowly fl ashing green.
3. Select the wireless radio network of your FRITZ!Repeater 1200 on the
computer, and start the connection process.
4. Enter the network key. The preconfi gured unique network key is printed
on the back of this guide and on the back of the device housing.
The computer establishes a connection to the FRITZ!Repeater 1200.
9