Operating Modes - AVM FRITZ! 1200 Guía De Instalación Y Operación

Operating Modes

The FRITZ! Repeater 1200 can work in two diff erent operating modes:
Wireless Bridge (Preset)
In "wireless bridge" access
mode, the FRITZ!Repeater and
your FRITZ!Box (router) are
connected via wireless LAN. The
FRITZ!Repeater can expand the
network by off ering connections
to computers and other network
devices via wireless LAN or LAN
cable.
WiFi
WiFi
LAN
1
FON
6
LAN Bridge
In "LAN bridge" access mode,
the FRITZ!Repeater and
your FRITZ!Box (router) are
connected by LAN cable. The
FRITZ!Repeater can expand the
network by off ering wireless
connections to computers and
other network devices.
If you would like to connect the
repeater with your FRITZ!Box
by cable, confi gure "LAN
bridge" access mode in the user
interface of the FRITZ!Repeater.
WiFi
LAN
1
FON
Wireless Bridge: Connect the FRITZ!Repeater 1200
to the Router at the Touch of a Button
1. Plug the FRITZ!Repeater into an outlet
near your FRITZ!Box.
The FRITZ!Repeater starts operating.
2. Wait until the LED starts slowly fl ashing
green. As soon as the LED slowly fl ashes
green, the FRITZ!Repeater is ready for a
connection.
3. Press the "Connect" button. The LED
fl ashes green more rapidly.
4. Within 2 minutes, start WPS on your FRITZ!Box:
- FRITZ!Box with "WPS" or "Connect/
WPS" button: Press button briefl y.
- FRITZ!Boxes with "WLAN" or "WLAN/
WPS" button: Press button for about 6
seconds until the "WLAN" LED fl ashes.
When the LED on the FRITZ!Repeater lights up permanently, the wireless
connection has been established.
1
2
3
4
7