Foot Controller; Control Button Functions; Where To Use Each Stitch - Texi Tutu MC 9900 Manual De Operación

TEXI Tutu operation manual

FOOT CONTROLLER

Use of foot controller will permit control of start, stop and speed with your foot.
1. Turn off the power switch.
2. Push foot controller plug into receptacle
on machine.
3. Place foot controller at your feet and turn
on power switch. Sew faster by increasing
the pressure on the controller. To stop,
remove your foot from the controller.

CONTROL BUTTON FUNCTIONS

The control button functions described in previous page will change when the foot control is connected.
A.START/STOP BUTTON
This button will be deactivated.
B.SPEED CONTROL BUTTON
This button will limit the maximum speed.
C.REVERSE STITCH BUTTON The machine will continue to sew reverse at same speed while this button is pressed.
When released, the machine will continue to sew forward.
SAFETY FEATURE OF ELECTRONIC MODEL
If the machine is jammed, it will stop with three beep sounds. After the cause of jamming is removed, step on
the foot control and it will run in normal condition.
WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons.
1. Handle the foot controller with care and avoid dropping it on the floor. Be sure not to place anything on top of it.
2. Use only foot controller provided with this machine.

WHERE TO USE EACH STITCH

01. STRAIGHT STITCH
02. LEFT POSITION, STRAIGHT STITCH
03. QUILT STITCH, LIKE HAND SEWN
04. STEM STITCH FOR STRETCH FABRICS
05. TRIPLE STRAIGHT STITCH
06. ZIGZAG STITCHING
07~11. BUTTONHOLES
12. 3-STEP ZIGZAG
13. SATIN STITCH
14. RICK-RACK
15. OVERLOCK
16. DOUBLE OVERLOCK
17. SHELL
18. BLIND HEM
19. BLIND HEM, ZIGZAG
20. DOUBLE ACTION
21. BRIDGING
22. FEATHER
23. FEATHER
24. ELASTIC OVERLOCK
25~66. DECORATIVE AND FUNCTIONAL STITCHES
125