Coltene ParaPostTaper Lux Instrucciones De Uso página 7

ParaPost Taper Lux
®
or K97) at slow speed.
6. Carefully drill to full depth through the center of
the post using an end cutting Tenax Starter Drill
(cat # TEDC1 Ø.036"/0.90 mm) or Tenax Drill
(cat # TEA11, Ø.043"/1.1 mm). Check radiographically at
each stage.
7. Gradually work up to original diameter using ParaPost Taper
Lux Drills.
8. Re-treat endodontically, if necessary.
9. Restore with new post/core and restoration.
Always verify steps via radiograph.
* References and/or literature available upon request.
Instructions for Use
7