GE 29111 Serie Guía De Uso página 38

Ringer HI/LOW/OFF (Shortcut)
There are two ways to set the ringer to HI/LO/OFF. One is the
traditional way as described in the Programming Functions;
Handset Setup; Ringer Volume menus. The other one is this
short cut to ringer menu.
1. Make sure the phone is OFF (not in TALK mode).
. Press the #pause/ringer button to display SET RINGER 1HI
2LOW 3OFF.
. Use the touch tone pad on the handset to select 1,  or
, or use the caller ID-volume (6 or 5) button to scroll to
your selection. HI is the default setting.
. Press #pause/ringer button again to save and display the
new selection for a few seconds.
Flash/Call Waiting
If you subscribe to the combined Call Waiting Caller ID service
from your local telephone company, you will receive Caller ID
information (if available) on Call Waiting calls. During a phone
call, you will hear a beep to indicate another call is waiting on
the line and Caller ID information for the waiting call shows on
the handset display.
• To connect to the waiting call, press the flash button on
the handset, and your original call is put on hold.
• To switch between the two calls, press the flash button.
8