Pulsar DIGIFORCE 860RT Manual Del Usuario página 8

Use the navigation buttons to set your desired password
(REC (6) button to increase the value; IR (5) button to decrease the
value). To switch between digits, briefly press the ZOOM (7) button.
To save the password and exit the submenu hold down the ZOOM (7)
button for longer than one second.
Setting Wi-Fi access levels
This option allows you to set required access level of the Stream
Vision application to your device.
Access level Owner . Stream Vision user has the complete
access to all device's functions.
Access level Guest
. Stream Vision user has the access only to
the video stream from the device.
Wi-Fi operation is shown by an icon on the display:
Wi-Fi icon glows – Wi-Fi is on;
Wi-Fi icon blinks – connection is established.
Stream Vision Technology
With the help of Stream Vision technology you can stream images from
the display of your Digiforce 860RT unit via Wi-Fi to a smartphone or PC
tablet. You can find further guidelines on Stream Vision in an individual
booklet or on our web site www.pulsar-nv.com
Selection of recording resolution
This menu item allows you to select the resolution of a video recording or
photo shot, depending on the active mode.
Video Mode. Available resolution options for video recording (pixels):
320x240
640x480
Photo Mode. Available resolution options for photo capture (pixels):
320x240
640x480
1280x960
To enter the submenu, press briefly the ZOOM (7) button.
To select resolution, use the IR (5) and REC (6) navigation buttons.
Confirm your choice with a brief press of the ZOOM (7) button.
The selected resolution is shown on the display as follows:
240p (for 320x240); 480p (for 640x480); 960p (for 1280x960)
The selected value is saved.
When the unit is next switched on, the display will show the last saved
value.
11
Date and time setup
This menu option allows you to set the current date and time, and time
format.
Date setup
Enter the submenu with a brief press of the ZOOM (7) button.
Date format is displayed as: yyyy/mm/dd (2016/07/12)
Use the navigation buttons to select desired value (REC (6) button to
increase value; IR (5) button to decrease value). To move from one
digit to another briefly press the ZOOM (7) button.
To save the date and go to time setup, press and hold down the ZOOM
(7) button for more than one second.
Time setup
Enter the submenu with a brief press of the ZOOM (7) button.
Time format is displayed as: "format mm/hh" (24 06:51)
Use the navigation buttons IR (5) / REC (6) to select the required time
format - 24/AM/PM. To set the hour value, briefly press the ZOOM
button.
Use the navigation buttons to select the hour value (REC button to
increase the value; IR button to decrease the value).
To set the minute value, briefly press the ZOOM button.
Use the navigation buttons to select the minute value (REC button to
increase the value; IR button to decrease the value).
To save the time settings and to exit the submenu, press and hold
down the ZOOM button for more than one second.
Current time in the format selected is shown on the display.
The set value is saved.
When the unit is next switched on, the display shows the last saved
value.
Sound recording
This menu option allows you to activate/deactivate sound recording only
during video recording.
Enter the submenu with a short press of the ZOOM (7) button.
Use the navigation buttons to select one of the options:
Yes – to activate sound recording.
No – to deactivate sound recording.
Confirm your selection with a short press of the ZOOM (7) button.
When activating sound recording, the
Icon is shown when sound is deactivated.
The sound record icon is shown on the display in the VIDEO and
PHOTO modes.
The set value is saved.
When the unit is next switched on, the display shows the last saved
value.
icon appears on the display.
12